Fire Walking

Định nghĩa Fire Walking là gì?

Fire WalkingLửa Walking. Đây là nghĩa tiếng Việt của thuật ngữ Fire Walking - một thuật ngữ thuộc nhóm Technology Terms - Công nghệ thông tin.

Độ phổ biến(Factor rating): 5/10

Cháy đi bộ là phương pháp xác định sự chuyển động của một gói dữ liệu từ một máy chủ bên ngoài không tin cậy đến một máy chủ nội bộ được bảo vệ thông qua một tường lửa. Ý tưởng đằng sau đi bộ lửa là để xác định cổng nào đang mở và liệu gói với thông tin điều khiển có thể đi qua một thiết bị lọc gói tin.

Xem thêm: Thuật ngữ công nghệ A-Z

Giải thích ý nghĩa

Thu thập thông tin về một mạng từ xa bảo vệ bởi một tường lửa có thể được thực hiện bằng đi bộ lửa. Một trong những ứng dụng của đi bộ lửa là để xác định các host hiện tại bên trong chu vi của mạng được bảo vệ. ứng dụng khác là để xác định danh sách các cổng truy cập thông qua một tường lửa. traceroute là một tiện ích sử dụng trong khi gỡ lỗi để xác định các host khác nhau hiện diện giữa một nguồn cụ thể và đích. Thời gian-to-live (TTL) lĩnh vực tương ứng với một tiêu đề gói tin IP, được sử dụng để xác định số lượng host gói có thể đi qua, đang giảm đi ở mọi bộ định tuyến. traceroute sử dụng Internet Control Message Protocol gói ping gửi đến một đích. Trường TTL được tăng lên bởi một sau mỗi vòng kế tiếp. Khi TTL đạt 0, router gửi lại một thông báo lỗi đến nguồn chỉ ra router mà tại đó các gói tin đã hết hạn. Kẻ tấn công tìm kiếm với nhu cầu đi bộ lửa để gửi các gói tin liên tiếp bằng cách đảm bảo rằng TTL của mỗi gói tin kế tiếp là một trong hơn trước đó. traceroute là một hình thức trinh sát mạng. Kể từ khi trace route được thực hiện tại lớp IP, bất kỳ giao thức như ICMP, Transmission Control Protocol hoặc User Datagram Protocol có thể được sử dụng. traceroute xác định là cửa ngõ cuối cùng đã chấp nhận các gói tin. Địa chỉ IP của một cửa ngõ trước các bức tường lửa và địa chỉ IP của một host bên trong vành đai an toàn là chỉ có hai điều cần thiết để thực hiện đi bộ lửa. Firewall giao thức quét là một loại ứng dụng, trong đó các gói giao thức khác nhau được chuyển qua các cảng khác nhau để xác định những giao thức được hỗ trợ và loại gói tin được phép bởi tường lửa.

What is the Fire Walking? - Definition

Fire walking is the method of determining the movement of a data packet from an untrusted external host to a protected internal host through a firewall. The idea behind fire walking is to determine which ports are open and whether packets with control information can pass through a packet filtering device.

Understanding the Fire Walking

Gathering information about a remote network protected by a firewall can be accomplished using fire walking. One of the uses of fire walking is to determine the hosts present inside the perimeter of the protected network. Another application is to determine the list of ports accessible via a firewall. Trace route is a utility used while debugging to determine the various hosts present between a particular source and destination. The time-to-live (TTL) field corresponding to an IP packet header, which is used to determine the number of hosts the packet can pass through, is decremented at every router. Trace route uses Internet Control Message Protocol ping packets sent to a destination. The TTL field is incremented by one after each successive round. When the TTL reaches 0, the router sends back an error message to the source indicating the router at which the packet expired. An attacker looking to fire walk needs to send successive packets by ensuring that the TTL of each successive packet is one more than the previous one. Trace route is a form of network reconnaissance. Since trace route is implemented at the IP layer, any protocol such as ICMP, Transmission Control Protocol or User Datagram Protocol can be used. Trace route determines the last gateway that accepted the packet. The IP address of a gateway before the firewall and the IP address of a host within the secure perimeter are the only two things required to implement fire walking. Firewall protocol scan is one type of application in which packets of different protocols are passed through various ports to determine what protocol is supported and what type of packets are allowed by the firewall.

Thuật ngữ liên quan

  • Packet
  • Firewall
  • Router
  • Gateway
  • Transmission Control Protocol (TCP)
  • Internet Control Message Protocol (ICMP)
  • User Datagram Protocol (UDP)
  • Time to Live (TTL)
  • Packet Filtering
  • Commit

Source: ? Technology Dictionary - Filegi - Techtopedia - Techterm

Trả lời

Email của bạn sẽ không được hiển thị công khai. Các trường bắt buộc được đánh dấu *